View Full Version : Advice on dialing in an Anthem
03-18-2012, 08:50 PM
I had an Anthem (full version) installed in my J-45, which I run through a ParaDI. I played my first gig through the new system tonight (I've played countless gigs through an M-1 with stellar results) but I was shocked at how thin and tinny my guitar sounded tonight. I know that I'm using a world class solution, and I know there's good advice on how to fix this issue. I would sincerely appreciate help/advice on dialing in the ParaDI and Anthem to provide a fuller, woodier sound.
03-19-2012, 08:58 AM
Generally, if you are getting a thin sound from your Anthem system, the solution is to lower the "Mic Gain". The mic gain is the small set-screw on the preamp. Adjustments should be made with a "jewelers" size flat-head screwdriver.
Turning the screw clockwise will turn up the mic, and therefore turn up the mids and highs in the overall sound. Turning it counter-clockwise will lower the mic gain. The goal here is to balance the undersaddle's output with the microphone. Getting this balance is the key to getting the best amplified sound.
LR Baggs Tech Support
Powered by vBulletin® Version 4.2.2 Copyright © 2015 vBulletin Solutions, Inc. All rights reserved.