View Full Version : M1 Problem
I just bought an M1 pickup and did a quick install using the 10ft guitar cable it comes with. Works well through my tube amp but I have tried to plug it into two different PA mixer boards and I get no sound. Am I missing something? Any help would be much appreciated!
06-26-2012, 12:23 PM
Are you using a preamp with your M1? The reason I ask is that the Passive M1 is a fairly low output pickup. So if you were using a high wattage, high impedance tube amp, you could get a fair signal. Then if you plugged into a low impedance input on a mixer or PA without a preamp or DI box, you might have an extremely low signal.
Thanks for the feedback! So I guess I'll have to buy a DI box? Any other options?
06-28-2012, 08:09 AM
A simple DI is the cheapest option. Something like this should do the trick: http://www.musiciansfriend.com/pro-audio/live-wire-solutions-spdi-passive-direct-box-with-attenuation-pad
You can also get something that will act as a preamp and a DI like our Para DI: http://www.musiciansfriend.com/accessories/lr-baggs-para-acoustic-di
09-20-2012, 06:47 AM
I would go with the Para DI. I have one and it works great.
Powered by vBulletin® Version 4.2.3 Copyright © 2015 vBulletin Solutions, Inc. All rights reserved.