Parse error: syntax error, unexpected '<' in /home/lrbaggsc/public_html/forum/archive/index.php(545) : eval()'d code on line 1
M1 Problem [Archive] - LR Baggs forum


View Full Version : M1 Problem

06-26-2012, 07:53 AM
I just bought an M1 pickup and did a quick install using the 10ft guitar cable it comes with. Works well through my tube amp but I have tried to plug it into two different PA mixer boards and I get no sound. Am I missing something? Any help would be much appreciated!

06-26-2012, 01:23 PM
Are you using a preamp with your M1? The reason I ask is that the Passive M1 is a fairly low output pickup. So if you were using a high wattage, high impedance tube amp, you could get a fair signal. Then if you plugged into a low impedance input on a mixer or PA without a preamp or DI box, you might have an extremely low signal.

06-26-2012, 03:36 PM
Thanks for the feedback! So I guess I'll have to buy a DI box? Any other options?

06-28-2012, 09:09 AM
A simple DI is the cheapest option. Something like this should do the trick:

You can also get something that will act as a preamp and a DI like our Para DI:

09-20-2012, 07:47 AM
I would go with the Para DI. I have one and it works great.