View Full Version : looking for a suitable pickup / amplification system for a Tacoma Chief C1C guitar
I have a great sounding guitar Tacoma Chief C1C ( pre fender)
and don't have a clue how and which pickup is suitable for this kind of guitar.
11-08-2012, 03:28 PM
I would recommend checking out the Anthem SL. It is a great choice if you like the sound of the guitar unplugged since so much of the signal is coming from the mic'd soundboard.
I want a mic kind of solution. I once had an EMG piezo and it sounded pretty bad.
the problem with this Tacoma guitar, is that its is not built with X brace pattern, and it does not have a standard sound-hole.
So, I cant reach underneath the bridge to install the mic. the sound-hole is a "wing" pattern on the upper left of the guitar and is too small for inserting my hand into the guitar, and the preamp can not be installed on it.
I need an alternative mic solution.
11-13-2012, 09:27 AM
I didn't realize that sound hole was so small. Unfortunately, we don't have anything that would work with that guitar.
Powered by vBulletin® Version 4.2.2 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.