PDA

View Full Version : Lyric - Wiring in end plug



fransmo
08-28-2013, 09:36 AM
Hi I have a Martin 00-21 and itīs end plug is smaller than the preamp/plug provided with the Lyric. Since I want to use an adapter to avoid drilling in guitar. (by the way I think itīis time LR Baggs provided a solution that fits Martin guitars, after all they are no minor guitar builder) I need to know how to resolder the wiring. Is it wired as a mono or a stereo plug? / Frans Mossberg, Sweden

Caleb_Elling
08-28-2013, 03:13 PM
The Lyric uses a 4 conductor (TRSS) stereo output jack wired like this-

Signal=Tip
Aux Input=Ring
Switch= Sleeve 1
Ground= Sleeve 2

The Ring channel can be used for the switch if you only want to use a 3 conductor jack.

However, I do need to mention that any modifications made to the Lyric's preamp, jack, or microphone, will void any remaining warranty that the system has.