Search:

Type: Posts; User: Caleb_Elling

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Hello Rolo, The ease of changing the battery...

    Hello Rolo,
    The ease of changing the battery largely has to do with the size of the sound hole. If you have a sound hole smaller than 4", you may need to loosen the strings to get the pickup out. If...
  2. Replies
    2
    Views
    197

    If you have an active pickup then you should be...

    If you have an active pickup then you should be able to use the FX Loop or run the reverb in front of the DI entirely. Running the reverb in front of the DI will change the way the guitar interacts...
  3. Hi Dan, We do have those available. If you want...

    Hi Dan,
    We do have those available. If you want to email me at [email protected], I can tell you how to get a hold of one.
  4. Replies
    3
    Views
    269

    The Anthem was designed specifically around the...

    The Anthem was designed specifically around the Element, so that would be the primary benefit.

    Although the Element was designed off of the Ribbon Transducer concept, the Element is better...
  5. Replies
    1
    Views
    197

    Hey Ken, Thanks for talking with me on the phone...

    Hey Ken,
    Thanks for talking with me on the phone this morning. Hopefully, you'll be able to work this out with your sound guy and get this resolved quickly and easily.

    Please let me know if I...
  6. Replies
    3
    Views
    269

    The Anthem system in general has a lower output...

    The Anthem system in general has a lower output level compared to some other pickups- active undersaddles especially. It should still have enough output to run into most professional amps or PA's...
  7. Replies
    1
    Views
    209

    Hey Al, I got your email. The extra adhesives...

    Hey Al,
    I got your email. The extra adhesives are on their way.

    Let me know if you need anything else.
  8. Replies
    3
    Views
    249

    Ok, If you lost some tonal response and nothing...

    Ok,
    If you lost some tonal response and nothing else has changed, then it's possible that something is broken.

    If you want to email me at [email protected], I can give you some options for repair.
  9. Replies
    3
    Views
    249

    Hi Brian, There's really not too much that can...

    Hi Brian,
    There's really not too much that can go wrong within the pickup itself. However, it might be possible that part of the coil has been disconnected inside the pickup. If you take a...
  10. Replies
    3
    Views
    285

    That sounds like a top-notch, versatile setup!...

    That sounds like a top-notch, versatile setup! You should be able to get a lot out of that combination with the Equinox.

    I imagine that the Custom Charis is pretty great too!

    All the best!
  11. Replies
    3
    Views
    285

    There are definitely other threads that go over...

    There are definitely other threads that go over the concept of adding a magnetic pickup to a Lyric. Below are links to a couple, but there are others as well. If you don't get the answers you need,...
  12. The Lyric comes with two full sets. If you need...

    The Lyric comes with two full sets. If you need to try multiple placements, you can usually use the first to try a few. Then you can use the second set to get the best hold after you determine the...
  13. Hey Matt, The Tru-Mic (Lyric and Anthem) is 1/2"...

    Hey Matt,
    The Tru-Mic (Lyric and Anthem) is 1/2" wide, 3/4" at the middle (widest point), and 2-1/4" long.

    If there's not enough room in front of the truss, you can definitely try moving the mic...
  14. Replies
    1
    Views
    251

    The LED on the iMix (non side mounted) only...

    The LED on the iMix (non side mounted) only indicates on/off. It doesn't dim or flicker as the battery begins to go out.

    Since there isn't a good indication on the preamp, it's usually best to...
  15. Replies
    3
    Views
    375

    It's not as likely, but I still wouldn't rule it...

    It's not as likely, but I still wouldn't rule it out. Usually a dying battery will result in a distorted sound, with a much slower decline in volume until the signal went away completely.
  16. Replies
    13
    Views
    2,482

    A problem may have developed over time. It's hard...

    A problem may have developed over time. It's hard to say.

    I got your email. I'm responding to it now.
  17. Replies
    5
    Views
    645

    If you were going to use some EQ, I would...

    If you were going to use some EQ, I would recommend a cut around 300-400 Hz, and maybe another at around 1.5k to 2.5k Hz.
  18. Replies
    5
    Views
    645

    OK, Without using any EQ, the M1A, like most...

    OK,
    Without using any EQ, the M1A, like most magnetic pickups, is going to sound pretty mid-heavy (even honky sometimes). Using some precise EQ is usually the best way to smooth out the sound and...
  19. Replies
    3
    Views
    375

    Is there any chance you are hitting the volume on...

    Is there any chance you are hitting the volume on your M1A with your hand/pick?

    It might be worth trying it with the M1A volume at full, and the DI's gain set a little lower. If you accidentally...
  20. Replies
    1
    Views
    245

    Left to right at the pin connector its ground...

    Left to right at the pin connector its ground (sleeve), white (switch), black (ring), red (tip).
  21. Replies
    2
    Views
    303

    If you have an iBeam onboard, then any volume...

    If you have an iBeam onboard, then any volume pedal designed for active pickups should work just fine.

    If you go with a regular passive volume pedal, usually they will have a 25k pot value (more...
  22. Hi Adrian, I replied to the email that you sent...

    Hi Adrian,
    I replied to the email that you sent me. If you would like to follow up there, it should be a faster method of communication.
  23. Replies
    1
    Views
    269

    Hey Glen, If you email me at [email protected], I...

    Hey Glen,
    If you email me at [email protected], I can get you the diagram and some more adhesives for the mic.
  24. Replies
    1
    Views
    287

    Hey Glen, If you email me at [email protected], I...

    Hey Glen,
    If you email me at [email protected], I can get you the diagram and some more adhesives for the mic.
  25. I've done quite a few installs on Breedlove...

    I've done quite a few installs on Breedlove guitars, but almost all of them were made in the last 10 years. So I'm not sure exactly what your Luthier is talking about.

    The JLD Truss is usually...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4