Search:

Type: Posts; User: Caleb_Elling

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    176
    Views
    102,714

    Hey imacnri, Unfortunately, since LR Baggs have...

    Hey imacnri,
    Unfortunately, since LR Baggs have a manufacturing agreement with PRS, we can't actually provide parts or support for the products that we make for them.

    If you are looking for a...
  2. Replies
    3
    Views
    122

    The 1/4" is an unbalanced output. It's...

    The 1/4" is an unbalanced output.

    It's usually best to use compression before reverb for a natural reverb tone. So you should probably run the SP in front of your reverb in the FX loop. Then you...
  3. Replies
    3
    Views
    122

    Hey Larry, The SP is a great compressor, and it...

    Hey Larry,
    The SP is a great compressor, and it should work well with the Venue. If you are going to use the XLR output of the Venue, then you will either have to use the SP in front of the Venue or...
  4. The Notch on the Venue and Session is a very...

    The Notch on the Venue and Session is a very simple control, designed to cut out resonant feedback frequencies. It's a very deep and narrow cut, the specifics of which are in the Venue manual.
    ...
  5. Hey Scotty, The reverb/delay on the guitar makes...

    Hey Scotty,
    The reverb/delay on the guitar makes it a little difficult to tell what's going on with the mic. The Lyric sounds a bit distant, but I think it may just be the reverb that's being used....
  6. Hey ilsimo, My co-worker said that he received...

    Hey ilsimo,
    My co-worker said that he received and responded to your email with some questions.

    If you get back to him, he should be able to get you sorted out.
  7. You're definitely right on with some of your...

    You're definitely right on with some of your comments. So many people out there don't realize that many acoustic amps do a terrible job representing the acoustic guitar's full range, especially...
  8. :cool: Thanks for following up! I'm sure this...

    :cool:
    Thanks for following up! I'm sure this will be helpful for future readers.
  9. Hey Daniel, That system wasn't ever designed to...

    Hey Daniel,
    That system wasn't ever designed to blend the two signals together. The Double Edge preamp/circuit was made custom for Ibanez, and blending the signals was just never a part of the...
  10. Replies
    3
    Views
    384

    The Element and the Ibanez systems are VERY...

    The Element and the Ibanez systems are VERY different from eachother. So string balance issues will not come from the same place. On a Piezo bridge pickup like the Ibanez, there are individual...
  11. From what I understand, the manual hasn't been...

    From what I understand, the manual hasn't been updated. The version with the Phase switch is the current version of the preamp.
  12. Hey Dwaine, That switch is actually a phase...

    Hey Dwaine,
    That switch is actually a phase switch. It inverts the phase between the pickups so that they can be sure to interact with each other correctly. Generally, one phase will sound a little...
  13. Thread: A lefty

    by Caleb_Elling
    Replies
    4
    Views
    3,813

    Hey Lkingston, It does work the same way with...

    Hey Lkingston,
    It does work the same way with the M80.

    Moving the pickup to the bridge side of the soundhole will alter the tone of the pickup slightly, like switching from the neck pickup to...
  14. Hey Edoardo, I just replied to your email.

    Hey Edoardo,
    I just replied to your email.
  15. That's fantastic to hear! I'm so glad that the...

    That's fantastic to hear!

    I'm so glad that the M80 is working so well for you.

    Thanks for sharing your experience.
  16. Replies
    3
    Views
    347

    Ok, But the tuner is still doing the same thing...

    Ok,
    But the tuner is still doing the same thing that is was the other night? Nothing has changed there, right?
  17. Replies
    2
    Views
    212

    OK, The Element pickup has an active sensor...

    OK,
    The Element pickup has an active sensor length of 3.4". So that should be more than enough for your 7-string guitar.

    The only Element preamps are either endpin preamps, like you would get...
  18. Hey nasha, I just replied to your email. If...

    Hey nasha,
    I just replied to your email.

    If you didn't receive it, let me know.
  19. Hey Lkingston, It sounds like you are going to...

    Hey Lkingston,
    It sounds like you are going to enjoy the M80!

    On a side note, satin finished guitars usually have more body noise, but that really depends on the pickup. Hopefully the M80 will...
  20. Replies
    3
    Views
    347

    Hey Hunter, Other than the tuner, is the DI...

    Hey Hunter,
    Other than the tuner, is the DI still working? Or have you noticed any additional issues?
  21. Hey rusty999, We actually make a dedicated...

    Hey rusty999,
    We actually make a dedicated Stage Pro Anthem system. Unfortunately, all of the connections are different from the Anthem SL, so you would need to swap out the whole system. However,...
  22. Replies
    3
    Views
    384

    Hello joakims, The first thing that I would...

    Hello joakims,
    The first thing that I would check is the hole that was drilled for the pickup. If there is any debris or wood remains in or around the hole, it could cause the saddle to not sit flat...
  23. Hey Ed, It sounds to me like one of a few things...

    Hey Ed,
    It sounds to me like one of a few things may be happening.

    The first observation is that I think that the preamp was rattling in the guitar, causing a distorted sound in the amplified...
  24. Replies
    2
    Views
    318

    Hey petrQ, Replacing the pots on the iMix remote...

    Hey petrQ,
    Replacing the pots on the iMix remote can definitely be done, but it isn't easy. Because of the way that the remote is wired, you would need to de-solder the existing pots, and...
  25. Hey 1975ELH, It definitely sounds like the...

    Hey 1975ELH,
    It definitely sounds like the installation would be the first thing to look at. Since the mic only carries sound above 250Hz, adjusting it won't effect the low end at all.

    My guess...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4