Search:

Type: Posts; User: Bryan McManus

Page 1 of 12 1 2 3 4

Search: Search took 0.02 seconds.

  1. Hi Ted, I'm happy to describe the differences...

    Hi Ted,

    I'm happy to describe the differences for you.

    Let me first say that the Lyric and Anthem use the same microphone capsule. The differences lie within the circuitry involved in the two...
  2. Hi Loren, Thank you for asking. To clarify...

    Hi Loren,

    Thank you for asking.

    To clarify #2 of your question, the iMIX is not two systems mixed together but one system that mixes two pickups together. The iMIX is capable of a mixed MONO...
  3. Hi Keith, Does this occur when you use only...

    Hi Keith,

    Does this occur when you use only one of the two outputs from the guitar or does it require you to be using both at the same time?

    Does touching metal in the ground circuit, such as...
  4. Replies
    5
    Views
    1,868

    Hi TC, We can assemble an output harness for...

    Hi TC,

    We can assemble an output harness for that DAP system. That replacement is available for $25 including postage/handling.

    Otherwise, the pin-out are as follows: With the preamp turned so...
  5. Replies
    5
    Views
    219

    Hi Lumenire, I would not install according to...

    Hi Lumenire,

    I would not install according to the diagram. That diagram included with the T-Bridge instructions is an interesting option but should be omitted from the package. That specifically...
  6. Hi David, I apologize for the delay and thank...

    Hi David,

    I apologize for the delay and thank you for your patience.

    More often due to the individual guitars, there have been instances where a Lyric(or Anthem, for that matter) has a...
  7. Hi David, Please say if you are using a PA...

    Hi David,

    Please say if you are using a PA system or a combo amplifier of some kind. The amplification system you connect to can have a significant impact on the balance of tone reaching your...
  8. Replies
    3
    Views
    677

    Hi Tutash, The best option I can think of that...

    Hi Tutash,

    The best option I can think of that would require the least modification to the system or the instrument would be the iMIX.

    One important question, though, is: Have you had any sort...
  9. Replies
    1
    Views
    415

    Hi JloYo, Thank you for asking. These are good...

    Hi JloYo,

    Thank you for asking. These are good comparative observations. It should be noted, however, that this is a comparison between apples and oranges or, specifically, a body pickup being...
  10. Replies
    2
    Views
    801

    Hi Lewis, The amount of midrange relative to...

    Hi Lewis,

    The amount of midrange relative to the rest of the frequency response can be altered by adjusting the Lyric's presence control. It is a lot like a high-cut filter and, if set too low,...
  11. Replies
    20
    Views
    8,811

    Hi Cromorne, Did your bass' preamp have one or...

    Hi Cromorne,

    Did your bass' preamp have one or two battery snaps?

    If there was one, it is most likely an A4 model

    If there are two, it is an Acoustibass model.

    In the Acoustibass, the two...
  12. Replies
    3
    Views
    1,860

    Tob, The answer to your original question is...

    Tob,

    The answer to your original question is mainly about signal-to-noise ratio but also depends on how long of a lead you would use between each pickup and the Para DI. For the passive M1, we...
  13. Replies
    5
    Views
    2,099

    Hi Oldghm, The GS-Mini's smaller body is less...

    Hi Oldghm,

    The GS-Mini's smaller body is less likely to accommodate the iBeam than other guitars. To be sure, though, you can make a dummy of the iBeam's footprint out of cardboard or scrap wood...
  14. Replies
    3
    Views
    1,612

    Hi Deadduck, The Para DI will power up when...

    Hi Deadduck,

    The Para DI will power up when supplied phantom power even with nothing plugged into the 1/4" input jack. On battery, you must plug into the input to turn the unit on.

    If the Para...
  15. Replies
    1
    Views
    1,333

    Hi Ian, In the interest of maintaining the...

    Hi Ian,

    In the interest of maintaining the guitar's acoustic output and tone, I must mention that the Element undersaddle pickup can have a detectable affect on the acoustic performance. Because...
  16. I cannot say what could be wrong. It's important...

    I cannot say what could be wrong. It's important to determine whether the connections or leads from the resistor and capacitor are being pushed against contacts in a tight space in a way that would...
  17. Replies
    2
    Views
    1,548

    Hi Steve, The passive M1 has a fairly low...

    Hi Steve,

    The passive M1 has a fairly low output. I can say it would not hurt anything for you to connect the passive M1 into the pickup input of another maker's preamp unit but you will probably...
  18. Hi Brett, So you have output from the pickup...

    Hi Brett,

    So you have output from the pickup system but no control? Is this the internal iMIX with soundhole-mounted thumbnails or does it have a preamp/control unit in the side of the body?
  19. Replies
    1
    Views
    1,105

    Acoustic output and tone is largely influenced by...

    Acoustic output and tone is largely influenced by the direct contact between the saddle and the bottom of the slot it rests in. When you install a pickup, you're placing something other than what...
  20. Replies
    1
    Views
    1,124

    Hi Bluis, Do you mean the system conveys too...

    Hi Bluis,

    Do you mean the system conveys too much body handling noise or do you mean the cables are loose and knocking against the inside of the guitar?

    If you mean too much handling noise, it...
  21. Replies
    4
    Views
    2,159

    Since you find no short between RING and GROUND...

    Since you find no short between RING and GROUND in the output harness, the way to test for the same in the pickup's output jack is to plug the harness back into the pickup, plug a TRS cable into the...
  22. Replies
    10
    Views
    5,408

    The EQ will affect the VU reading. If you...

    The EQ will affect the VU reading. If you optimize the gain with the EQ at flat, and then you boost some of the EQ bands, you will then be more likely to clip or overdrive at the center frequency of...
  23. Can you clarify what you mean by "string noise"?

    Can you clarify what you mean by "string noise"?
  24. Hi Woody, Monday the 3rd is in fact our Labor...

    Hi Woody,

    Monday the 3rd is in fact our Labor Day but I'll be in the office Tuesday morning.
  25. To avoid getting into technical drawings or...

    To avoid getting into technical drawings or listing dimensions with text descriptions, please call me at your convenience at 805-929-3545, ext. 111, for real-time dimensions with clarification of...
Results 1 to 25 of 290
Page 1 of 12 1 2 3 4