T bridge->GigPro->board. Huge buzz when switch OPEN.
In my Ibanez Artcore I have an LR Baggs T Bridge, running into an LR Baggs Gig Pro preamp. I have a 1/4" jack for the acoustic side, and another separate one for the existing humbuckers. I want to keep the systems completely separate.
However, I want to use a Strat style 5 way switch(which is really a 3 way, 2 pole) to switch between the humbuckers and the T bridge. The humbuckers are on one side of the switch, and the T bridge is on the other. I simply have the two wires from the T Bridge volume control interrupted on their way to the 1/4" jack, and attached to the last two pins of the switch.
When the T bridge is closed-in operation-it sounds fantastic, with no noise, or hum at all. But When the switch for the T bridge is OPEN, it makes a horrendous, distorted, buzzing sound that is so hot it pins the meters all the way. It's certainly not like any 60 cycle hum I've ever heard. I have tried it on 2 different systems and the results are identical. What am I doing wrong and how can I correct this?
Thank you for your time.
Last edited by took-the-red-pill; 04-02-2014 at 04:58 PM.
Does this occur when you use only one of the two outputs from the guitar or does it require you to be using both at the same time?
Does touching metal in the ground circuit, such as the output jack hardware, either reduce/eliminate the buzz or does it get worse? I guess that's to ask, if it doesn't sound like 60Hz hum, does it respond to grounding tests as would a compromised shield. Inversely, does touching the T-Bridge make the noise less or more?
You mentioned keeping the systems separate and with their own outputs. Does the 5-way switch have two outputs and serve as an either/or for two totally independent signals? If they are joined, it can work against your intended result.
Please reply with clarification.
Sorry to butt in, but when you get the system working, I'd love to hear what it sounds like. I've been thinking about installing a T-Bridge on my Artcore AF-85 for a while now.