Lyric mixed with a pre-installed pickup
I'am planning to buy a new guitar, this guitar comes with some Fishman pickup.
It is possible to install the Lyric and use just one output jack? Can someone provide me some installation tips (or tutorial) and explain me how can i mix/blend these two signals after the installation.
The Lyric does have the capability of adding a passive pickup to it's output jack in order to utilize stereo output. However, since most Fishman pickups are active, it is very likely that you will not be able to combine both systems onto the same jack without disrupting the on/off switching functions of either the Lyric or the Fishman.
Originally Posted by ewernet
Even if you were able to get both systems on the same output jack (with some highly modified and warranty-voiding wiring), the systems would only be in stereo. Any blending functions would have to be done with an additional external stereo preamp. So it's not something that would be easy or recommendable.
additional external stereo preamp
Even if you made it possible to obtain equally devices on the same end result jack (with several remarkably improved along with warranty-voiding wiring), your devices could only wear stereo. Just about any blending operates might need to be practiced through an additional external stereo preamp. Therefore it is not really something that could be effortless or maybe recommended.
Last edited by thomasusa80; Yesterday at 03:41 AM.
Tags for this Thread