LR Baggs Technical Support On The Forum
Hi everybody and welcome to the LR Baggs fan site forum!
I am the technical support guy at LR Baggs.
If you have questions, comments or concerns regarding application, installation or use of LR Baggs products, you can reach us here or at [email protected].
iMix battery compartment won't latch
I have an iMix system in my acoustic and the battery compartment came loose and will not latch anymore. It looks like there may be a small pin or screw of some sort missing, which is supposed to latch the compartment in place when you change out batteries. Is this an easy fix or will I need to order a new part? If so, is it possible to order such a minor part?
sometimes the pin will brake loose. Please e-mail your address to [email protected] and I will send you one as soon as I am back in the office. We have been at the NAMM show for about a week.
I bought a Venue last summer and it works fine except in one situation: when it's powered by a power-supply. When I use a power-supply, there's a noticeable hum. I tried everything: ground-lift, different power-supply, different outlet, different house.
My unit is still under warranty. Is there something I'm doing wrong or should I turn it in for repairs?
It depends on the power supply. The Venue's DC input is filtered to prevent noise from a wide variety of power supplies but there are still many that can induce a hum or buzz in the signal. Power supplies designed specifically for analog signal path devices are most compatible with the Venue DI.
Originally Posted by Hecube
We strongly recommend the 1-Spot power supply made by Visual Sound.
Power supplies designed or provided for use with digital signal processors or effects are most likely to cause a noise.
Thanks. I'll be sure to try that. I'll keep you informed...
Originally Posted by Bryan McManus
Hi, I have a Para Di. I have had trouble finding a y cable to use for the effects loop (I'm in the uk). I would want to have a tuner, eq/boost, a looper and perhaps a chorus in the effect loop. As i can't find a cable, my questions are
1 Is it ok to put the effects in a chain in front of the DI?
2 Can you recommend where I can order, in the UK, a Y cable that would be suitable for the effects loop.
Hi - Gibson SJ-150 in for repairs with a DOA Element. Saddle issues resolved and pickup is now working albeit with excessive handling noise. I wire clamped the pickup at the exit hole under the bridge and still the handling noise is excessive. To give you an example - playing a Dsus4 chord you actually HEAR your pinky finger hitting the fingerboard through the amp. This is a factory install and I did not see a black dot to indicate correct orientation of the element. Thanks for any help you can provide.
Hello I have a simon and patrick with a lrbaggs duet pickup my input jack was pulled out and the wires unhooked can anyone tell me which goes where. Its a TRS jack and the wires are blue / whiteish see through / red / black / bare . any helps is greatly appriciated. Thanks
The optimum search term is "Insert Cable." If you google, go there, click shopping, type insert cable in the search bar and you should get a host of online sellers.
Originally Posted by gps
Tags for this Thread