Ctrl-X Push-Pull instead of push button for stereo/mono
Hi, could the Ctrl-X preamp be wired with a push-pull pot controlling the stereo/mono selection instead of the default push button? Looking to minimise drilling on my guitar and keep as stock a look as possible. Thanks!
Also, how about a 3-position rotary pot instead of the 3-way toggle to control mag/blend/piezo?
Last edited by mero; 03-30-2012 at 08:56 AM.
I suppose it's possible to replace the plunger switch with the push/pull function of a pot, as long as the push/pull has the same six contacts as the plunger switch does, as each position connects two pairs of contacts. The 3-way mini-toggle could also be replaced with an alternative switch interface, as long as it is a 3-position DPDT switch usable as ON-ON-ON.
Last edited by Bryan McManus; 03-30-2012 at 09:16 AM.
A white slide switch might be neat, too (on a white pickguard). It would take more pickguard surgery, but it would reduce the risk of inadvertently flipping the switch while strumming hard.
Hi Bryan, got another question
The 9-lug stereo jack that came with the Ctrl-X unfortunately doesn't fit in my guitar. It's drilled with a 1/2 inch diameter hole, for a deep panel jack, like below
I do have this stereo deep panel jack (http://www.warmoth.com/Deep-Panel-St...t-P725C68.aspx), but it won't be able do the battery-switching function since there are only 3 lugs
Short of enlarging the hole to fit the ctrl-x jack (which I'm trying to avoid since the guitar is finished), are there any deep panel jacks that will work just as well? How about this Fishman jack with 4-lugs? http://www.stewmac.com/shop/Electron...dpin_Jack.html
The jack in the link will work since it has 4 conductors. LR Baggs offers one like it - we call it the Strapjack Plus - in a gunmetal finish with a rustic bronze finish on the strap button. Functionally, however, they are the same product.
A 3-conductor jack, like the Warmoth unit you mentioned, will also work if you're willing to use the CTRL-X in mono mode only. The Ring contact is only needed for signal if you plan to use stereo output mode. In mono mode, the ring contact can be the power switch.
Last edited by Bryan McManus; 04-18-2012 at 07:52 AM.
Tags for this Thread