Results 1 to 2 of 2

Thread: LR Baggs Radius on traditional instruments

  1. #1
    Junior Member
    Join Date
    Mar 2014
    Posts
    1

    LR Baggs Radius on traditional instruments

    Hi

    I am surveying for a contact or piezo type pickup for my acoustic traditional instrument. I come across radius and find it interesting but the pick up seem to design for mandolin and i can't find the frequency pickup and other specification on your website.

    I wish to attached radius on my traditional instrument
    54606145499187574.jpg

    the frequency range is from 200 hz to 5 khz, mainly within 200 hz to 1 khz.

    frequency.jpg

    please find the audio sample here:

    http://www.mmo.net.my/LRbaggs/sample.mp3

    Your reply is very much appreciated.

    Thanks.

  2. #2
    Hello engbok,
    From the chart that you've shown and the sound sample, the Radius should definitely be able to handle the frequency response of your instrument. Depending on the thickness of the body, the supplied jack clamp may or may not fit, but if you access to the inside, then a permanent jack installation is also an option.

    All the best!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •