Results 1 to 3 of 3

Thread: Using Control-X mixing magnetic and "normal" piezo Pickup?

  1. #1
    Junior Member
    Join Date
    Aug 2012
    Posts
    2

    Red face Using Control-X mixing magnetic and "normal" piezo Pickup?

    Hi there
    I have to electrify a resonator dobro for a customer. He wants a Gretsch-style Filtertron close to the fingerboard and a piezo on the cone or the bridge (It's likely gonna be a Fishman Nashville or Classic Pickup)
    Is it possible to use the Ctrl-X for the purpose of mixing the two signals?
    I know that the Ctrl-X is made for a piezobridge in a strat e.g. but i'm curious to hear, whether i could use it for this certain application.
    It's a rather cheap instrument and the customer doesn't care for a battery compartment etc.

    Thanks for your input
    Greetings from Switzerland
    Last edited by riffhai; 08-20-2012 at 06:08 AM.

  2. #2
    Hi Riffhai,

    The CTRL-X is designed with a nominal amount of gain(+3dB) applied to the piezo signal by the transistor at its input. That minimal amount of gain means the piezo signal should be considered "high output."

    Ceramic crystal-type piezo sensors usually provide the higher output signals which will be easier to balance with the signal from the magnetic pickup.

    I do not have specs on the output from either of the piezo options you mentioned for the resonator.

  3. #3
    Junior Member
    Join Date
    Jan 2014
    Posts
    1
    Did you manage to make it work? Any sound samples?
    _____________________________________________
    Steve Works
    piezoelectric sensors

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •