Using Control-X mixing magnetic and "normal" piezo Pickup?
I have to electrify a resonator dobro for a customer. He wants a Gretsch-style Filtertron close to the fingerboard and a piezo on the cone or the bridge (It's likely gonna be a Fishman Nashville or Classic Pickup)
Is it possible to use the Ctrl-X for the purpose of mixing the two signals?
I know that the Ctrl-X is made for a piezobridge in a strat e.g. but i'm curious to hear, whether i could use it for this certain application.
It's a rather cheap instrument and the customer doesn't care for a battery compartment etc.
Thanks for your input
Greetings from Switzerland
Last edited by riffhai; 08-20-2012 at 05:08 AM.
The CTRL-X is designed with a nominal amount of gain(+3dB) applied to the piezo signal by the transistor at its input. That minimal amount of gain means the piezo signal should be considered "high output."
Ceramic crystal-type piezo sensors usually provide the higher output signals which will be easier to balance with the signal from the magnetic pickup.
I do not have specs on the output from either of the piezo options you mentioned for the resonator.
Did you manage to make it work? Any sound samples?
Tags for this Thread