Results 1 to 4 of 4

Thread: Anthem SL-Open Mic or other PA system

  1. #1
    Junior Member
    Join Date
    Apr 2012
    Posts
    17

    Anthem SL-Open Mic or other PA system

    I am totally happy with my Athem played through my Ultrasound amp.

    When I play out, on, say, a generic rock and roll PA at a bar, are there any guidelines for 1/4" jack vs. balanced three pin?
    Since Anthem is part USP and half microphone, should I play through my Baggs pre-amp? If so, should I then go three pin to the board, 1/4", or does it matter??

    cheers,

    brent

  2. #2
    Hi Brent,
    I would recommend always going through the preamp if you have it available. A feature that is particularly useful in a bar type setting is the notch filter to keep feedback at bay. If you are running more than 10' or so to the PA I suggest using an XLR cable to keep the signal nice and clean.

    -Christian

  3. #3
    Junior Member
    Join Date
    Apr 2012
    Posts
    17
    Christian: Thanks for the "feedback."

    So, there are no compatibility issues with the 1/4" jack as opposed to SLR; just a matter of strength of signal??


    brent

  4. #4
    Brent,
    No, there won't be any compatibility issues. The XLR is more to keep the signal shielded from outside interference.

    -Christian

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •