Results 1 to 4 of 4

Thread: looking for a suitable pickup / amplification system for a Tacoma Chief C1C guitar

Hybrid View

  1. #1
    Junior Member
    Join Date
    Nov 2012
    Posts
    2

    looking for a suitable pickup / amplification system for a Tacoma Chief C1C guitar

    Hello,

    I have a great sounding guitar Tacoma Chief C1C ( pre fender)
    DV016_Jpg_Large_512372.010_natural_R.jpg

    and don't have a clue how and which pickup is suitable for this kind of guitar.
    any suggestions?
    Thanks
    Yair

  2. #2
    Hi Yair,
    I would recommend checking out the Anthem SL. It is a great choice if you like the sound of the guitar unplugged since so much of the signal is coming from the mic'd soundboard.

    -Christian

  3. #3
    Junior Member
    Join Date
    Nov 2012
    Posts
    2
    Thanks Christian

    I want a mic kind of solution. I once had an EMG piezo and it sounded pretty bad.
    the problem with this Tacoma guitar, is that its is not built with X brace pattern, and it does not have a standard sound-hole.
    So, I cant reach underneath the bridge to install the mic. the sound-hole is a "wing" pattern on the upper left of the guitar and is too small for inserting my hand into the guitar, and the preamp can not be installed on it.

    I need an alternative mic solution.

    Thanks
    Yair

  4. #4
    Yair,
    I didn't realize that sound hole was so small. Unfortunately, we don't have anything that would work with that guitar.

    -Christian

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •