Results 1 to 3 of 3

Thread: LR Baggs M80 End Pin Jack Wiring Info

Hybrid View

  1. #1
    Junior Member
    Join Date
    Jan 2013
    Posts
    1

    LR Baggs M80 End Pin Jack Wiring Info

    I recently purchased a LR Baggs M80 Soundhole/Magnetic pickup and I can't wait to try it out on my acoustic guitar.

    However, I'm unable to use the supplied pre-wired strapjack assembly, as it doesn't fit snugly into the presently larger diameter (>1/2") end pin jack hole on my acoustic guitar.

    I've decided to fabricate my own wiring harness, strapjack assembly using an alternative (larger sized) acoustic end pin jack which should fit on my acoustic guitar.
    e.g.
    EP-4605-010 Chrome Acoustic End Pin Jack
    EP-4600-001 Switchcraft Acoustic End Pin Jack

    Please could someone post the wiring details for the supplied pre-wired strapjack assembly (1/4" TS/TRS? jack and 3.5mm TRS plug)?

    Cheers!

  2. #2
    The 3.5mm TRS jack plugs into the pickup with the tip=red=signal, the ring=white=switch, and the sleeve=bare=ground. The 1/4” jack is TRS as well.

  3. #3
    Junior Member
    Join Date
    May 2013
    Posts
    5
    thanks for posting this. Who knew that a year later someone else (me) would need this info {:^D
    Music is what feelings sound like

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •