Results 1 to 2 of 2

Thread: whats the best way to use the para DI with my new Fishman Artist amp/

Hybrid View

  1. #1
    Junior Member
    Join Date
    Feb 2013
    Posts
    1

    whats the best way to use the para DI with my new Fishman Artist amp/

    Heh guys. I have a Tayor 614ce that plays great but can sound a little tinny on some boards. I have a Fishman Loudbox artist and I just picked up the para today. I have a gig at a church tomorrow and would like to speed up my learning curve. So would I plug the Taylor into the para, then plug the para into the amp? Or would I take the amp out and plug the para there, then run a line from the para to the board?
    Last edited by EdRo; 02-28-2013 at 06:26 PM. Reason: I hadnt finished my thread and accidently sent it!!

  2. #2
    Hi EdRo,
    In my opinion, I think you'll get a cleaner signal going direct from the Para DI into the board. So if you want to use the LoudBox as a monitor, you can use the 1/4" out into the amp and the XLR into the mixer.

    That's what I would recommend, but trying a few different configurations will give you a good idea of what will work best for you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •