Custom face plate for M1 pick up.
My Washburn D-20 has an off center sound hole. I made a custom faceplate for my LR Baggs M1. If you look closely you can see the "ears" are not the same distance from the closest string pickup screw. I also laminated the faceplate so it would not split along the 8 holes. The wood you see is Pau. Behind that is walnut with the grain going opposite. I also put a layer of fiberglass cloth on the back just to be sure. I like the wood look.
WOW, Bob. Amazing work!!!
If this type of work isn't your profession, it SHOULD be!!
Thanks for sharing. This is really cool!