Results 1 to 4 of 4

Thread: M80 & Lyric

  1. #1
    Junior Member
    Join Date
    May 2011
    Posts
    9

    M80 & Lyric

    If I keep the M80 in passive mode can I add it to ring channel of the Lyric? I was thinking about getting a Mogami 2330 audio low noise shielded wire, add a male jack at one end and solder the other to the Lyric. This way I couldn't have to mess with the cord that comes with the M80.

  2. #2
    Administrator Caleb_Elling's Avatar
    Join Date
    Jun 2011
    Posts
    1,138
    The M80 can be wired to the Lyric's aux input in passive mode. However, you will only be able to get both signals with the use of a stereo cable.

    I don't see any issues with that setup though.

  3. #3
    Junior Member
    Join Date
    Jul 2013
    Posts
    3
    Caleb,

    By stereo cable, bo you mean TRS/XLR?

    Paulin

  4. #4
    Administrator Caleb_Elling's Avatar
    Join Date
    Jun 2011
    Posts
    1,138
    Yeah,
    Sorry, I should have clarified. TRS, or balanced 1/4" cables will give you stereo output. I usually recommend a stereo Y cable so that you can easily split the signal from the guitar to two separate channels on your mixer, amp, or recording interface.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •