Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Is M80 swappable with my existing M1 Active 1.8" cabling

Hybrid View

  1. #1
    Junior Member
    Join Date
    Aug 2013
    Posts
    5

    Is M80 swappable with my existing M1 Active 1.8" cabling

    Hi:
    First time here. Looking at getting the M80. Proud and satisfied owner of M1 Active for a number of years. I like the idea of more body amplification, battery checker and the ability to switch to passive mode. My luthier installed end pin jack and cabling for the M1. Can I use the existing cable and simply plug in the M80?

    1975 dreadnought Martin clone
    Finger picking and strumming style
    Wireless Line 6 Relay ( for wandering around the audience)

    Two amplification modes:
    BOSE L1 Compact using line out no guitar preset on Channel 2 the BOSE guitar preset on the L1 compact is too boomy for my ears
    BOSE T1 mixer using M1 Active Tonematch preset into line out on Compact
    Also have BOSE L1 Model II and use it for larger venues always with the T1 Tonematch

    Thanks for your help.

  2. #2
    The M1A and the M80 use the same output harness. So you can use the M80 with the jack that is already installed, and without any modification to the guitar.

  3. #3
    Junior Member
    Join Date
    Aug 2013
    Posts
    5
    Thanks Caleb! Just another question regarding the M80. I have watched all the performing artists and note that they are seated. Since I am often moving about among the audience will the M80 be too senstitive to my movements? I often play a duo where the other player is using an arranger keyboard with drums,bass, etc. My thought is the M80 will help me cut through the mix when I play with him. Thanks again.

  4. #4
    The M80 is sensitive to the body, but not overly so. I've seen the M80 used live by some very active and energetic bands, as well as playing it myself, and I've never noticed any over sensitivity.

  5. #5
    Junior Member
    Join Date
    Aug 2013
    Posts
    5
    Thanks Caleb. Off we go!

  6. #6
    Junior Member
    Join Date
    Aug 2013
    Posts
    5
    And we have lift off! Picked up this afternoon (pardon the pun) easy switchout and a noticeable improvement over an already good M1 Active. Very happy! Thanks to Lorne and all the crew at LA Baggs!!!

  7. #7
    Junior Member
    Join Date
    Apr 2014
    Posts
    4
    I will add to this rather than start a new thread since my subject is related.

    I just bought an M1a the other day and had it installed in a Recording King guitar that I bought the same day. It was a spur of the moment thing, and at the time I didn't realize that there was an improved model: the M80.

    I was interested in exchanging my M1a for the M80 and was wondering if the endpoint jack assembly was close enough that one could be substituted for the other in the retail packaging.

    On the other hand, I'm not sure if maybe the M1a might not be a little better for me personally. I play jazzy arrangements of pop and Christian tunes. I play fingerstyle with no nails and hence the sound coming from the strings is quite soft. After struggling with fret and body noises with a piezo, I stumbled upon the idea of using a magnetic pickup. That worked really well with my style and lately my two guitars have been a Loar archtop with a floating pickup and an Ibanez with a magnetic soundhole pickup. Two different looks but really a similar sound.

    Anyway, as much as I like the magnetic pickup, I missed a bit of the acoustic sound with it. I listened to lots of online demos and liked the M1 the best of any. I'm not really after a purely acoustic sound. I just want a little bit of acoustic sparkle mixed in with the jazz-boxy sound.

    When I listen to the M1A, I really like it a lot. Much more than the purely magnetic sound I was getting, but I feel like if I could adjust the blend, I would go for a little more magnetic and a bit less body. I am getting a touch more fret squeak than I would like. Keep in mind that my style is soft so the noises are relatively louder. This is related to my style in particular. I am going for a sound along the lines of of Martin Taylor on his Vanden archtop: a jazz box with bronze round wound strings with a piezo blended in for a little high frequency sparkle.

    As I read up on the M80, I understand that the blend is about 60% magnetic to about 40% acoustic. On the M1 I have read that it is about 80% magnetic to 20% acoustic. I also understand that the EQ is different on the M80 and that the acoustic part emphasizes lower frequencies.

    These two things would probably be good for 99% of all users, but they both scare me. I turn the low frequencies up a bit and do bass lines under everything. I kind of like the magnetic pickup in this range. I don't play my guitar like a drum at all. Then the 40% blend: at 20% I already am looking at raising the pole pieces and putting felt or cork at the soundhole mounts. It seems to me that the M80 would be a step away from this.

    If I could actually try them both out I would know in just a couple of seconds which one would suit me better, but I haven't got that chance where I live.

    Here is me playing with the regular soundhole pickup that doesn't add any body resonance:

    http://youtu.be/-2IldjxMQG8

    And here is my playing the same sort of style with an archtop:

    http://youtu.be/GFYJEs0D_w8

    Which would be better for this type of playing? The M1 or the M80?

  8. #8
    Junior Member
    Join Date
    Apr 2014
    Posts
    4
    I just found this. Not in English but you can tell which is which by watching him change the plug. A mic comparison of the M1a and M80 with a soft fingerstyle, and while they both sound pretty, the m80 is clearly better sounding even with soft fingerstyle.

    http://youtu.be/SOrxjxlTnic

  9. #9
    Junior Member
    Join Date
    Aug 2013
    Posts
    5
    First of all let me apologize for calling the company founder Lorne instead of Lloyd and the company LA Baggs instead of LR!
    I guess I was so enthusiastic about my new M80!. In response to your question Lkingston I would highly recommend the M80 and have no regrets about using it. On top of the sound you also get the added battery level indicator which is very useful. Of course the amp or sound system you use is very important. Based on your videos I think you'll do just fine. Thanks for sharing and let us know how you make out.

    Cheers!

  10. #10
    Junior Member
    Join Date
    Apr 2014
    Posts
    4
    These days I do more video than music, and when I do do music, it's sort of sneaking it in. Anyway, here is a video I did for a local Celebrate Recovery program (a Christian 12 steps program). The guitar is my winging the song "Faling in Love With Jesus". This is an inexpensive Recording King guitar (which I adore) and the M1a pickup. No EQ. Just a little reverb. This is pretty much exactly the sound I was going for. A sort of jazz boxy sound with just a little soundboard sparkle, sort of like what Martin Taylor gets from his Vanden signature model archtop with the blend between piezo and magnetic pickups. Anyway, for what it's worth here is the video with my M1a guitar playing:

    https://vimeo.com/91992238

    If you listen closely you can hear the guitar body rubbing against my clothes. That's because the playing style is so soft and so amplified. That's with the 20% body sound of the M1a. I would expect the M80 to have 40% body sound and be a bit much with my style (but better for almost everyone else) I really hope to be able to try one soon just to know for sure. In the meantime, I am really very pleased with the sound of the M1a.
    Last edited by Lkingston; 04-14-2014 at 06:46 PM. Reason: Spelling

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •