Products List (by family)   -- Amplification --   Acoustic Reference Amplifier   -- Pickups & Pickup Systems --   M1 M1 Active   iMix stereo mixer: iMix iMix Onboard   iBeam: iBeam Active System iBeam Onboard iMix iMix Onboard iBeam (passive)   Element: Element Active System Element Active System-VTC Element Onboard System iMix iMix Onboard   LB6 Series   Hex Pickups   Radius Pickup   Ribbon Transducer: RTS2 Dual Source Micro EQ Ribbon Transducer (passive)   Violin Pickup   X-Bridge   T-Bridge   -- Preamps --   Para D.I. Feedback Master Gigpro Mixpro Ctrl-X Dual Source Preamp Microdrive II Products List (alphabetical)          Acoustic Reference Amplifier Ctrl-X Dual Source Dual Source Preamp Element Active System Element Active System-VTC Element Onboard System Feedback Master Gigpro Hex Pickups iBeam Active System iBeam Onboard iBeam (passive) iMix iMix Onboard LB6 Series M1 M1 Active Micro EQ Microdrive II Mixpro Para D.I. Radius Pickup RTS2 Ribbon Transducer (passive) T-Bridge X-Bridge Violin Pickup Dual Source System Includes: .Element Pick-up .Internal mixing preamp .Pre-wired strap jack .FET condenser microphone .Soundhole remote control .Battery Preamp and mic available separatley

The Dual Source System is a miniature onboard microphone/pickup mixing system that features all-discrete class A circuitry. It seamlessly combines our high-tech Ribbon Transducer™ with a high quality FET condenser capsule for an affordable, simple-to-use, one- cord mix. By using clever and efficient design, we've added these features without raising the price or compromising the quality.

The Pickup: The Element Pick-up is a minature internally mounted microphone/pickup mixing system that seamlessly combines our patented Element transducer with a high quality FET condenser microphone. The ultra-quiet preamp mounts non-destructively inside of the instrument and features all discrete audiophile circuitry for our signature quality sound and a great one-cord mix right out of box. The preamp controls have ample flexibility to fine tune the response to your individual guitar.

The Microphone: The Dual Source mic is a high quality omni-directional FET condenser capsule encased in a small block of acoustically transparent foam. It mounts easily on the back of the inside of the guitar with Velcro. It is designed to use the entire back surface as a "pressure zone." This minimizes the effect of standing waves and hot spots inside of the guitar. Consequently, the sound is closer to that of an outside microphone than with other internal mic placements. This location also gives increased protection against feedback.

The Electronics: If you have ever wondered how we can make such great sounding stuff for such a low price, this is it - we do more with less than any audio designer that we know of. Not only does this make for the purest possible sound but it actually reduces the cost. The entire Dual Source signal path, for example, contains only six transistors and a few film caps. We also insisted on all discrete Class A circuitry, with no negative feedback, for the lowest noise and most sweet, transparent sound possible.

Tom Anderson Tom Anderson Guitars	"The thing about the Dual Source that is so amazing is when I plug in my guitar it sounds like my guitar. None of the other pickup or pickup/mic systems that I have tried have done that."
David Wilcox	"You can spend 10 times more on heavy outboard gear and maybe sound 10 percent better, but for a one cord, self contained pickup system that is easy to use, the Dual Source is SIMPLY GREAT SOUND!"
Mike Tatro www.harmony-central.com	"Holy Grail acoustic tone. Very smooth, natural and forgiving. You have to try REALLY hard to screw the sound of this thing up - a very valuable trait when dealing with inexperienced sound men."